|Dendritics Gemscale-50 Owners Manual Page 1|
As with any precision instrument, Gemscale 50 requires you to follow the Operating Instructions and to take the necessary care to get the most from your Gemscale.
Calibration should be
checked when you move the scale from one surface to another when the scale is
ON. If necessary, re-calibrate the scale rather than TARE.
The scale will not operate when the battery needs to be replaced.
Avoid immersions and
Avoid shocks, such as
dropping it on the floor.
particles such as crumbs or stones from falling into the mechanism. Avoid
Avoid temperatures over 145° F (60° C) such as a car dashboard in the summer sun.
Allow extreme temperatures to settle before use, about 15 minutes.
calibrate with a 50.000 carat weight only.
The scale will not give stable readings in excessively vibrative environments such as holding in a hand or on a moving train.
Do not attempt to
dismantle the scale. Do not remove back label. This will void the warranty.
Follow the directions on the back for return and warranty covered repairs.
Images and webpage designs © 2001-2013 jb and Dendritics Inc.